Cross-border

B2B cross border payments settled T+0 in stablecoins, T+1 in fiat

The delay sits in the correspondent chain, not in the payment. Taking the chain out of the middle is what removes the wait.

Understanding where the time and the money go is the only way to judge whether a different rail helps you, or just moves the problem.

  • Payment Institution today
  • EMI in progress, France
  • CASP in progress, France
  • GDPR and DORA compliant
  • ISO 27001 and SOC 2 Type II in progress
How a payment runs
  • 1Top-UpFiat arrives through the linked IBAN and is converted into a supported stablecoin.
  • 2SendStablecoins go to a pre-registered counterparty or a verified wallet.
  • 3Make a PaymentStablecoins convert back to fiat and leave over traditional banking rails.
  • 4ReceiveShare your wallet address or QR code to take stablecoins in.
  • 5SwapExchange one supported stablecoin for another inside the platform.
Services will become available only upon obtaining the relevant CASP and EMI authorisations.

The four costs nobody quotes

The spread

The exchange rate margin, usually larger than the visible fee and rarely itemised.

The intermediaries

Each correspondent bank in the chain may deduct its own charge, which is why the amount received rarely matches the amount sent.

The float

Money in transit is money you cannot use, and at volume that working capital cost is real.

The people

Chasing payments, matching remittance advice and reconciling at month end is a salaried cost that never appears on an invoice.

How the traditional route actually works

  1. 1You instruct your bank. If you miss the cut-off, day one is already gone.
  2. 2Your bank finds a route. If it has no direct relationship with the beneficiary's bank, it uses one or more correspondents that do.
  3. 3Each hop applies its own checks. Sanctions screening, compliance review, and its own operating hours. A weekend or a public holiday anywhere in the chain adds days.
  4. 4Each hop may take a fee. Which is why the recipient often gets less than you sent and neither of you can say exactly where the difference went.
  5. 5It lands, eventually. Then somebody matches it to an invoice by hand.

None of this is anyone behaving badly. It is what happens when a payment has to cross institutions that were never designed as a single system.

What a stablecoin settlement layer changes

StageCorrespondent bankingStablecoin settlement
The middleMultiple institutions, each adding delay and costOne transfer, settling instantly within the platform once funds are available
Cost driverDistance, currency corridor and the number of hopsThe network, largely independent of distance
HoursBusiness hours, in every jurisdiction in the chainThe network does not close
VisibilityRequest it and waitBalances and activity visible in real time
The fiat endsBank railsStill bank rails, through a linked IBAN

That last row is the one most vendor pages leave out. The entrance and the exit are still ordinary banking. What changes is the long middle, and how much that is worth to you depends on how much of your current delay sits there.

How your money moves

The platform runs on a stablecoin settlement layer. Fiat is not held inside it. It moves in and out through a linked IBAN, and converts on the way through.

  1. 1Top-Up. You transfer fiat to your linked IBAN. It is converted through the on-ramp and lands in your wallet as a supported stablecoin. Where the fiat currency and the stablecoin denomination match, that conversion is 1:1 before fees.
  2. 2Register the counterparty. Anyone you pay has to exist as a counterparty record first, holding the name and the IBAN or wallet address. Anyone paying you has to be whitelisted as a source.
  3. 3Send or Make a Payment. Send moves stablecoins to a counterparty wallet. Make a Payment converts stablecoins back to fiat and sends it over traditional rails to a bank account.
  4. 4Receive and Swap. Incoming stablecoins arrive at your wallet address. Swap exchanges one supported stablecoin for another without leaving the platform.
  5. 5Reconcile. Every transfer, payment, swap and top-up sits in Activity, and the whole history exports to CSV or Excel.

Controls built into every payment

Most of the operational risk in cross-border payments comes from paying the wrong party, or taking money from a source you cannot account for. NGPES makes both a deliberate step.

  • We pre-register your counterparties. Funds can only be sent to a party already recorded in the platform, with the routing details attached. There is no free-text payment field to get wrong.
  • We whitelist your sources. Money can only be received from parties you have approved in advance.
  • We hold unknown sources. If funds arrive from a source that is not recognised, they are placed on hold and the support team contacts you. They are then either returned or released to you.
  • Subaccounts separate the flows. One organisation account can hold subaccounts per team, function or payment flow, each with its own balances and transaction history, all under central control.
  • We keep everything on the record. The dashboard shows balances, activity and account-level liquidity in real time, and Activity exports the full history to CSV or Excel for reconciliation.

Settlement speed

Here is what each leg takes.

LegTiming
Stablecoin transferSettles instantly within the platform, once funds have been received and are available.
Stablecoin to fiat conversionInstant.
Fiat arriving at the recipientDepends on the destination currency, the geography and the external banking rails involved. NGPES does not control this leg.
Fiat top-upDepends on the inbound transfer reaching your linked IBAN.

The digital asset layer is instant once liquidity is available, and the fiat legs at either end move at the speed of the banks involved. That is a large improvement on a correspondent banking chain, and it is not the same as end-to-end instant.

What the platform supports

This is what the platform supports today.

Position today
StablecoinsSelected MiCA-compliant stablecoins only. Assets outside that set are not held on the platform.
Non-compliant assetsFunds arriving in an asset that is not MiCA-compliant can be converted into a MiCA-compliant one, as a case-by-case exception, not a standing service.
FiatMoves in and out through the linked IBAN via on-ramp and off-ramp. Fiat balances are not held on the platform.
SwapBetween supported MiCA-compliant stablecoins only.
External accountsYou can register your own external bank accounts and wallet addresses. They are verified before use, and only for flows involving the same organisation.
Team managementAnnounced as coming soon. Not available yet.

If a particular asset, currency or corridor matters to your business, ask us before you build around it.

Our regulatory position

Where NGPES is authorised today.

  • Payment Institution status today
  • EMI in progress, through NGPES Payments in France
  • CASP in progress, through NGPES Digital in France
  • GDPR and DORA compliant
  • ISO 27001 and SOC 2 Type II in progress

NGPES is based in France and the platform supports selected MiCA-compliant stablecoins only, by design. Services will become available only upon obtaining the relevant CASP and EMI authorisations.

Coverage and settlement times

What NGPES states today.

What NGPES states
ReachFunds move across 150+ countries via SEPA, SWIFT and local rails.
Stablecoin settlementT+0.
Fiat settlementT+1.
Processing24/7/365, with no end-of-day batch. Everything is processed in real time.
ConversionInstant conversion between fiat, in USD, EUR and GBP, and stablecoins.
Exchange24/7 fiat to stablecoin exchange, with OTC support.

For a per-country arrival time, a fee, or the supported asset and network list, talk to the team.

Frequently asked questions

Why are B2B cross-border payments so slow?

Because the payment is passed between correspondent banks, each with its own compliance checks, cut-off times and operating hours. The money is queueing at each handover, not travelling slowly.

What does a cross-border payment really cost?

More than the quoted fee. There is the exchange rate spread, deductions taken by intermediary banks, the working capital tied up while funds are in transit, and the staff time spent chasing and reconciling.

How do stablecoins change it?

They replace the chain of intermediaries in the middle with a single transfer that settles instantly within the platform once funds are available, at a cost driven by the network rather than by distance.

Do our counterparties need to hold stablecoins?

No. Make a Payment converts your balance to fiat and pays their bank account over traditional rails, so nothing changes for them.

Is the whole payment instant then?

No, and anyone claiming so is overselling. The stablecoin leg is instant once funds are available. The fiat legs at either end move at the speed of the banks involved.

Is this compliant in the EU?

NGPES is France-based, holds Payment Institution status, and has EMI and CASP authorisations in progress. The platform supports selected MiCA-compliant stablecoins only.

What does finance get out of it?

One transaction history covering the fiat and stablecoin legs, visible in real time and exportable to CSV or Excel, instead of joining bank statements to exchange exports by hand.

Work out where your delay actually sits.

Bring two or three real corridors and we will walk through them with you.

About NGPES

NGPES, Next Generation Payment EcoSystem, is a B2B payment infrastructure that enables businesses to send, receive, hold and move money efficiently across borders. Both fiat currencies and regulated stablecoins are integrated, for faster settlements, lower costs, and enhanced transparency. NGPES is based at 35 avenue de Friedland, 75008 Paris, and was ranked 83 in the Finance Innovation Fintech100 2025.

Interested in our solution? Talk to our team, or email sales@ngpes.com.